Leister LE 700 Instructions D'utilisation page 14

Service and repairs
• Repairs should only be carried out by authorised Leister Service Centres. They guarantee a correct and reliable
repair service within reasonable period, using original spare parts in accordance with the circuit diagrams and
spare parts lists.
Warranty
• For this tool, we generally provide a warranty in accordance with the statutory / country-specific regulations
from the date of purchase (verified by invoice or delivery document). Damage that has occurred will be cor-
rected by replacement or repair. Heating elements are excluded from this warranty.
• Additional claims shall be excluded, subject to statutory regulations.
• Damage caused by normal wear, overloading or improper handling is excluded from the guarantee.
• Warranty claims will be rejected for tools that have been altered or changed by the purchaser.
Installation declaration
(As defined by the EC Machinery Directive 2006/42; Annex II B)
Leister Technologies AG, Galileo-Strasse 10, CH-6056 Kaegiswil/Switzerland hereby declares that the
incomplete machine
Designation:
Type:
– insofar as is possible from the scope of supply – corresponds to the applicable fundamental requirements of the
EC Machinery Directive (2006/42).
The incomplete machine furthermore corresponds to the requirements of the following EC directive(s):
EC directive(s):
Harmonised standards:
We furthermore declare that the special technical documents pursuant to Annex VII (Part B) have been compiled
for this incomplete machine and that we are committed to communicate these electronically to the market
surveillance authorities upon justified request.
Name of the documentation officer: Patrick Rieder, Compliance Manager
The commissioning of the incomplete machine is prohibited until it may be determined that the machine in which
the incomplete machine has been installed corresponds to the provisions of the EC Machinery Directive (2006/42).
Kaegiswil, 05.02.2013
Disposal
Power tools, accessories and packaging should be recycled. For EU countries only: do not dispose of
power tools in your household rubbish! According to the European Directive 2002/96 on waste electrical
and electronic equipment and its implementation in national law, power tools which can no longer be
used must be collected separately and recycled.
14
Air heater
LE 700; LE 3000; LE 3300; LE 5000; LE 10000 S
Electromagnetic Compatibility 2004/108
Low Voltage Directive 2006/95
RoHS Directive 2011/65
EN 12100-1, EN 12100-2, EN 60204-1, EN 14121-1,
EN 55014-1, EN 55014-2, EN 61000-6-2,
EN 61000-3-2, EN 61000-3-3,
EN 61000-3-12, EN 61000-3-11 (Z
EN 62233, EN 60335-2-45, EN 50581
Bruno von Wyl, CTO
),
max
Beat Mettler, COO