Maintenance Schedule - WORMS ACCESS 3000 i Manuel D'utilisation

mm No.
2
0,75 18
1,27 16 12 30/0.18 1,486 1,5V
2,0 14 17 37/0.26 0,952
3,5 12 à 10 23 45/0.32 0,517
3,5 10 à 8 35 70/0.32 0,332

10. MAINTENANCE SCHEDULE

Daily
(8 h)
After 20 h or
for the 1st month
Every 50 h
Every 100 h
Every 200 h
Every 300 h
Every 1000 h
(2 ans)
NOTE
•
Maintenance operations require trained and qualified personnel.
•
The maintenance schedule is given as a guide. Under severe conditions, the frequency of
maintenance must be increased.
A No./mm /100m 1 A
7 30/0.18 2,477 2,5V
1V
•
Check all components according to ''PRE-OPERATING CHECKS''.
•
Check and refill gasoline and engine oil.
•
Check oil filter, clean it if necessary.
•
Change engine oil (more often if used in dusty or dirty environment).
•
Clean air filter.
•
Change oil (more often if used in dusty or dirty environment).
•
Wash air cleaner foam element (more often if used in dirty or dusty
environments).
•
Clean fuel strainer and the fuel sediment cup.
•
Check the spark plug and clean it if necessary.
•
Replace air cleaner foam element.
•
Clean and adjust spark plug gap.
•
Change engine oil (more often if used in dusty or dirty environment).
•
Check and adjust valve clearance.
•
Clean the carbon of the crankcase.
•
Remove carbon from cylinder head and the top of the cylinder.
•
Replace engine mount rubber.
•
Inspect control panel parts.
•
Check rotor and stator.
•
Replace engine mount rubber.
•
Overhaul engine.
•
Change fuel lines.
Amps (A)
3 A 5 A 8 A
8V 12V -
5V 7,5V 12V
3V 5V 8V
- 1,5V 2,5V 4V
- 1V 2V 2,5V 3,5V
10 A 12 A 15 A
- - -
15V 18V -
10V 12V 15V
5V 6,5V 7,5V
4V 5V
EN
FR
ES
IT
RO
41