Maintenance Schedule - WORMS Access 2200 XL Manuel D'utilisation

Bulb / Halogen / Heating
Neons - Low consumption Bulb
gringer
Compressor
Electric Engine Without Load
voLtAgE drop iN ELEctric EXtENsioN cords
When a long electric extension cord is used to connect an appliance or tool to the generator, a certain
amount of voltage drop or loss occurs in the extension cord which reduces the effective voltage
available for the appliance or tool.
The chart below has been prepared to illustrate the approximate voltage loss when an extension cord
of 300 feet (approx. 100 meters) is used to connect an appliance or tool to the generator.
mm No.
2
0,75 18
1,27 16
2,0 14
3,5 12 à 10 23 45/0.32 0,517
3,5 10 à 8 35 70/0.32 0,332

12. MAiNtENANcE schEdULE

daily (8 h)
After 20 h or for the
1st month
Every 50 h
Every 100 h
48
A No./mm /100m
7 30/0.18 2,477 2,5V
12 30/0.18 1,486 1,5V
17 37/0.26 0,952
•
Check all components according to ''PRE-OPERATINg CHECKS''.
•
Check and refill gasoline and engine oil.
•
Change oil more often if used in dusty or dirty environment.
•
Wash air cleaner foam element more often if used in dirty or dusty
environments.
•
Check the condition of the paper element. Do not wash the paper element.
•
Change oil more often if used in dusty or dirty environment.
•
Check the spark plug and clean it if necessary.
•
Clean the fuel strainer and the fuel sediment cup.
AccEss 2200 XL
1500 W - 2 HP
Ampérage (A)
1 A 3 A 5 A 8 A
8V 12V
5V 7,5V 12V
1V 3V 5V 8V
- 1,5V 2,5V 4V
- 1V 2V 2,5V 3,5V
2200 W
1100 W
1300 W
700 W
10 A 12 A 15 A
- - - -
15V 18V -
10V 12V 15V
5V 6,5V 7,5V
4V 5V