How To Do" Maintenance; Engine Oil Change - WORMS Access 2200 XL Manuel D'utilisation

13. "hoW to do" MAiNtENANcE

13.1. ENgiNE oiL chANgE

•
Change engine oil every 100 hours. (For new engine, change oil after 20 hours.)
•
Drain the oil while the engine is warm to ensure complete and rapid draining.
1. Place an adapted bowl under the engine to get back the
worn oil then undo the cork of Filling (with gauge) and
the drain plug.
2. Let completely pour the worn oil then re-screw The drain
plug firmly.
3. Place the engine on a flat surface ground and fill
the crankcase roll until get the high level with the
recommended motor oil.
4. Re-screw the cork of filling (with gauge).
•
Use fresh and high quality lubricating oil to the specified level. If contaminated or deteriorated oil is
used or the quantity of the engine oil is not sufficient, the engine damage will result and its life will
be greatly shortened.
Please dispose of used engine oil in a manner that is compatible with the
environment. We suggest you take use a sealed container to take it to your
local service station or recycling center for reclamation. Do not throw it in
the trash or pour it on the ground.
Used engine oil may cause skin cancer if repeatedly left in contact with the
skin for prolonged periods. Although this is unlikely unless you handle used
oil on a daily basis, it is still advisable to thoroughly
wash your hands with soap and water as soon as possible after handling
used oil.
50
Cork
Gasket
Draining
Bolt
Cork
Gasket
Draining
Bolt
High Level
H