Zipper Maschinen ZI-BTM160 Manuel D'utilisation page 29

OPERATION
Filling:
Before filling the drum, ensure that the opening
is aligned in such a way that the mixture cannot
fall out of the drum.
Put the mixture in when the drum is rotating
(do not overfill the drum!)
Mixing:
Adjust the drum a little bit lower.
Thus a good mixing result is achieved
Emptying:
Swivel the drum in the downward direction to
empty it.
Ensure that there is an adequate container
under the drum (e.g., wheelbarrow).
Ensure that no mixture falls on the ground
ATTENTION!
The full drum is heavy!
Storage and breaks:
Adjust the drum in the downward direction
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at 29
ZI-BTM160 ZI-BTM180