Panasonic WJ-HD500A Mode D'emploi page 76

DVD DRIVE SETUP
The procedures described below let you select the DVD
Drive function when the specified DVD drive is installed in
the system.
1. Move the cursor to DVD on the WJ-HD500 SETUP menu
by pressing the C or D button, then press the SET but-
ton.
The DVD menu shown below appears on the monitor
screen.
10 DVD
DVD FORMAT
*AUTO COPY(EVENT)
AUTO COPY(EMERGENCY)
DVD DISKEND
DVD FULL
2. Select an item or item parameter on the menu by press-
ing the D or C button.
3. To return to the previous setup menu, press the
SETUP/ESC button.
DVD Format
Refer to PREPARATIONS for details.
Alarm Recording Backup
The alarm images recorded by the disk recorder can be
automatically stored (back up) on the DVD-RAM disk by
copying the records programmed in advance.
The procedures described below let you enable or disable
this function (alarm backup) on the DVD-RAM disk.
1. Move the cursor to AUTO COPY(EVENT) on the DVD
menu by pressing the C or D button
2. Select either OFF or ON by pressing the + or - but-
ton, then press the SET button.
OFF: Disables alarm data backup.
ON: Enables alarm data backup.
The factory default setting is OFF.
76
OFF
OFF
STOP
1%
The AUTO COPY(EVENT) menu shown below appears
on the monitor.
10-2 AUTO COPY(EVENT)
CAM COPY CAM COPY
1 OFF
2 OFF
3 OFF
4 OFF
5 OFF
6 OFF
7 OFF
8 OFF
3. Move the cursor to the appropriate COPY column by
pressing the D, C, A or B button, then select either
mode for a camera by pressing the + or - button.
OFF: Disables camera alarm backup.
ON: Enables camera alarm backup.
4. Repeat the above step 3 to program the settings for
other cameras.
5. After completing the settings, press the SETUP/ESC
button to return to the previous DVD menu.
Notes:
• Selecting ON for AUTO COPY(EVENT) will enable
manual or automatic alarm data backup for the
specified cameras.
However, Timer Recording is required to program
additional timer settings.
Refer to AUTO COPY on the Program Timer menu
for details on the selected recording method.
• The following operations will be disabled by AUTO
COPY(EVENT) ON.
Formatting the DVD-RAM disk
Displaying DVD-RAM disk record-
ing list
Playing
recording list
To enable the above functions, set the parameter to
OFF.
9 OFF
10 OFF
11 OFF
12 OFF
13 OFF
14 OFF
15 OFF
16 OFF
back DVD-RAM disk