Publicité
Les langues disponibles
Les langues disponibles
Manual Erase Function
1. Repeat the procedures until the ERASE menu is dis-
played on the monitor screen for auto erase.
9-3-2 ERASE
AUTO ERASE OFF
ERASE DATA BEFORE SEP12.00
ARE YOU SURE TO EXECUTE?
2. Move the cursor to the ERASE DATA BEFORE parame-
ter in the menu by pressing the D or C button.
3. Select the month by pressing the + or - button, then
press the B button to select the date and year by
repeating the procedure.
4. Move the cursor to the EXECUTE parameter by press-
ing the D or C button.
Select "YES" by pressing the A or B button, then press
the SET button to execute erase.
9-3-2 ERASE
AUTO ERASE OFF
ERASE DATA BEFORE SEP12.00
ARE YOU SURE TO EXECUTE?
The recorded data before the specified date will be
erased from the disk.
100
[SET]:EXECUTE
YES
[ESC]:STOP
YES
NOW ERASING
5. When the erase is completed, "DONE!" appears on the
lower-center in the menu.
NO
6. Press the SETUP/ESC button for two seconds or more
to close the menu and return to the normal screen.
NO
9-3-2 ERASE
AUTO ERASE OFF
ERASE DATA BEFORE SEP12.00
ARE YOU SURE TO EXECUTE?
[ESC]:STOP
DONE!
YES
NO
Publicité
