Panasonic WJ-HD500A Mode D'emploi page 45

RECORDING SETUP
Common Recording Setup
These items let you determine the common recording set-
tings, camera assignment for the groups and playback set-
tings.
1. Move the cursor to COMMON SETUP in the WJ-HD500
SETUP menu by pressing the D or C button, then
press the SET button.
The COMMON SETUP menu as shown below appears
on the Multiscreen Monitor.
1 COMMON SETUP
REC QUALITY
FIELD/FRAME
COLOR MODE
CAMERA GENLOCK OFF
GROUP SETUP
CAMERA ASSIGNMENT
TITLE
TITLE EMBEDDED OFF
TIME EMBEDDED OFF
THUMBNAIL 8
PLAYBACK MODE ALL
SHUTTLE SPEED LOW
HDD DISKEND STOP
2. To select an item or an item parameter from the COM-
MON SETUP menu, move the cursor to the item or item
parameter by pressing the D or C button.
3. To return to the previous WJ-HD500 SETUP menu,
press the SETUP/ESC button.
FIELD
COLOR STD
Recording Quality Setup
These items let you determine the image quality recorded
on the Hard Disk.
Video Pixels (Resolution)
This item lets you select the pixel number (number of hori-
zontal x vertical image elements) or resolution of the video
image.
1. Move the cursor to the FIELD/FRAME parameter in the
COMMON SETUP menu by pressing the D or C but-
ton.
2. Select the desired mode by pressing the + or - but-
ton.
FRAME 3DIM ON: High resolution (720 x 480) distor-
tion-free image
FRAME 3DIM OFF: High resolution (720 x 480) image.
FIELD: Normal resolution (720 x 240) image
The factory default setting is FIELD.
Color Mode Setting
This item lets you enable or disable recording in color or
black and white.
1. Move the cursor to the COLOR MODE parameter in the
COMMON SETUP menu by pressing the D or C but-
ton.
2. Select the desired mode by pressing the + or - but-
ton.
COLOR FINE: Images are recorded with enhanced col-
ors.
COLOR STD: Images are recorded with normal colors.
B/W: Images are recorded in black-and-white.
The factory default setting is COLOR STD.
Camera Sync Setting
This item lets you determine camera synchronization in the
system.
1. Move the cursor to the CAMERA GENLOCK parameter
on the COMMON SETUP menu by pressing the D or C
button.
2. Select the desired mode by pressing the + or - but-
ton.
45