CAME BX-246 Manuel Pour L'installation page 44

12 Connecting two coupled gearmotors having a single control
With two coupled gearmotors, you can command only the opening (by button and/or radio control): the gate will close only in automatic
closing mode.
• Coordinate the direction of travel of the two gearmotors and , by modifying the motor's rotation (invert the cables on
terminals FA-FC and M-N).
• Make the electrical connections only on
the motor's control board .
• Whereas, the adjustments and features, must be made on both boards.
ON
1 2 3 4 5 6 7 8 9 10
• Connect the two boards together, as illustrated.
• Set DIP 2 and 1 to ON on both boards.
For opening with a radio control, connect an external receiver (RExxx/RBExxx with relay in MONOSTABLE mode) on terminals 2-7 of
the motor .