CAME BX-246 Manuel Pour L'installation page 27

"CAUTION: IMPROPER INSTALLATION MAY CAUSE SERIOUS DAMAGE, FOLLOW ALL INSTALLATION INSTRUCTIONS CAREFULLY"
1 Legend of symbols
This symbol tells you to read the section with particular care.
This symbol tells you that the sections concern safety issues.
This symbol tells you what to say to the end-users.
2 Conditions of use
2.1 Intended use
The BX246 operator is designed to power sliding gates in residential and condominium settings.
Do not install or use unless as otherwise shown in this manual.
2.2 Limitations to use
For intensive or condominium use: max gate weight 600kg with max gate length 18 m.
3 Reference standards
The company CAME cancelli automatici is ISO 9001 quality certified; it has also obtained the ISO 14001 environmental safeguarding
certification. CAME engineers and manufactures all of its products in Italy.
This product complies with the following legislation: see declaration of compliance.
4 Description
4.1 Operator
This product is engineered and manufactured by CAME CANCELLI AUTOMATICI S.p.A. in compliance with current safety standards.
The operator is made of a cast aluminium part inside of which operates the irreversible, electromechanical gearmotor and an ABS plastic
lining which holds the electronic card, transformer and the clamp to house 2 emergency batteries.
4.2 Technical features
BX246 OPERATOR
Control panel power supply: 230V AC 50/60Hz
Operator power supply: 24V DC
Draw: 10 A
Power: 400 W
Reduction ratio: 1/33
Thrust: 700 N
Max speed.: 6÷12 m/min
Duty cycle: intensive use
Protection rating: IP54
Insulation class: I
Weight: 15 kg
"IMPORTANT INSTALLATION, SAFETY INSTRUCTIONS"
"THIS MANUAL IS ONLY FOR PROFESSIONAL OR QUALIFIED INSTALLERS"