Samsung HW-Q930C Manuel Complet page 24

07 CONNECTING A MOBILE DEVICE
Method 1. Connecting via Bluetooth
When a mobile device is connected using Bluetooth, you can hear stereo sound without the hassle of cabling.
• When you connect a paired Bluetooth device with the Soundbar off, the Soundbar automatically turns on.
The initial connection
• When connecting to a new Bluetooth device, make sure the device is within 1 m distance.
1. Press the PAIR button on the Soundbar remote control to enter the "BT PAIRING" mode.
(OR) a. Press the
(Multi Function) /
"BT" changes to "BT PAIRING" in a few seconds automatically or changes to "BT READY" if there is a connect record.
b. When "BT READY" appears, press and hold the
5 seconds to display "BT PAIRING".
<HW-Q930C /
HW-Q800C>
2. On your device, select "Soundbar Q***C" from the list that appears.
• When the Soundbar is connected to the Mobile device, [Mobile Device Name] → "BT" appears in the front display.
3. Play music files from the device connected via Bluetooth through the Soundbar.
• After you have connected the Soundbar to your mobile device the first time, use the "BT READY" mode to reconnect.
If the device fails to connect
• If you have an existing Soundbar (e.g., "Soundbar Q***C") in the list of speakers on the Mobile device, delete it.
• Repeat steps 1 and 2.
What is the difference between BT READY and BT PAIRING?
• BT READY : In this mode, you can reconnect any Samsung TV or mobile device that was connected before.
• BT PAIRING : In this mode, you can connect a new device to the Soundbar.
(Press the PAIR button on the Soundbar remote control or press and hold the
Soundbar for more than 5 seconds while the Soundbar is in "BT" mode.)
Mobile device
(Source) button on the top panel and then select "BT".
Top of the Soundbar
<HW-Q930C /
BT READY
HW-Q800C>
Top of the Soundbar
BT PAIRING
Top of the Soundbar
<HW-Q700C>
(Mic On/Off) / (Source) button on the top panel of the Soundbar for more than
Top of the Soundbar
5 Sec
<HW-Q700C>
(Mic On/Off) /
ENG - 24
BT READY
5 Sec
BT PAIRING
(Source) button on the top of the