Samsung HW-Q930C Manuel Complet page 11

04 CONNECTING THE SOUNDBAR
Connecting the power and units
Use the Power cord to connect the Subwoofer, Surround Speakers, and Soundbar to an electrical outlet in the following order:
• For more information about the required electrical power and power consumption, refer to the label attached to the product. (Label: Rear of
the Soundbar Main Unit)
1. Connect the Power cord to the Subwoofer.
2. Connect the power cord to the Left and Right Surround Speakers. (optional)
3. Connect the Power cord to the Soundbar.
4. Connect power to the Soundbar, Subwoofer and Surround Speakers. The Subwoofer and Surround Speakers are automatically connected when
the Soundbar is turned on.
NOTE
• Connect the Subwoofer and Surround Speakers power before connecting to the Soundbar. The Subwoofer and Surround Speakers will be
automatically connected when turning on the Soundbar.
• If you unplug and reconnect the power cord when the product is turned on, the Soundbar turns on automatically.
• The surround speaker system is supported by applicable models only.
Rear of Subwoofer
Bottoms of the Left and
Right Surround Speakers
(optional)
POWER
ID SET ID SET
(WOOFER, REAR)
NETWORK
Bottom of the Soundbar
Main Unit
ENG - 11
Power Cord
Power Cord
Power Cord
SERVICE
DIGITAL AUDIO IN DIGITAL AUDIO IN
(OPTICAL) (OPTICAL)
SERVICE
HDMI IN 1 HDMI IN 1 HDMI 1
HDMI 1
HDMI IN 2 HDMI IN 2 HDMI 2
HDMI TO TV
(eARC/ARC)
HDMI TO TV
(eARC/ARC)
LINK LED - Blue is On
(optional)