Samsung HW-Q930C Manuel Complet page 16

Connecting using an Optical Cable
Pre-connection Checklist
• When both the HDMI cable and optical cable are connected, the HDMI signal is received first.
• When you use an optical cable and the terminals have covers, be sure to remove the covers.
1. With the TV and Soundbar turned off, connect the DIGITAL AUDIO IN (OPTICAL) port on the Soundbar and the OPTICAL output port on the TV
with the optical cable (not supplied), as shown in the figure.
2. Turn on the Soundbar and TV.
3. Press the (Multi Function) /
"D.IN" mode.
4. The TV sound is output from the Soundbar.
Optical Cable (not supplied)
OPTICAL OUT
Top of the Soundbar
Top of the Soundbar
(Source) button at the top of the Soundbar or the
Bottom of the Soundbar
DIGITAL AUDIO IN
(OPTICAL)
D.IN
D.IN
(Source) button on the remote control to select the
ENG - 16
<HW-Q930C / HW-Q800C>
<HW-Q700C>