Télécharger Imprimer la page

SilverCrest SBKP 1 A1 Instructions D'utilisation Et Consignes De Sécurité page 12

Publicité

Les langues disponibles
  • FR

Les langues disponibles

If rechargeable batteries have leaked, avoid contact with skin,
eyes and mucous membranes with the chemicals! Flush immedi-
ately the affected areas with fresh water and seek medical
attention!
Do not cover the product during operation or charging. Otherwise the
product can overheat.
This product contains a rechargeable battery, which can lead to fire,
explosion or leakage of hazardous substances in case of incorrect appli-
cation.
Before use
Before use, verify the package contents are complete and undamaged!
Charging the battery
The battery must be charged prior to first use.
The LED
will flash red and headphones sound acoustic signal when the
2
battery is drained. The battery should then be charged as soon as possible.
Plug the micro-USB plug
charging socket
charging cable into the USB port on a PC or a USB adapter (not included).
Note: The LED will remain red whilst charging. Once the battery is fully
charged, the LED will remain blue.
Once charging has completed, remove the micro-USB plug from the head-
phones.
Using the headphones
Connect the headphones with a communication device.
Place the headphones near a switched on communication device (e.g.
mobile or computer).
12 GB/IE/NI
on the charging cable into the micro-USB
12
on the headphones! Plug the USB plug
7
on the
13

Publicité

loading