Black & Decker CLMA4825L2 Manuel D'utilisation page 16

ENGLISH (Original instructions)
Problem Possible solution
Mower runs but cutting Has battery been fully charged? Press state of
performance is unsatis- charge button.
factory, or does not cut
entire lawn.
Release bail handle to turn mower off. Remove
safety key and battery pack. Turn mower over
and check:
Blade for sharpness - Keep blade sharp.
u
Deck and discharge chute for clogging.
u
Wheel height adjustment may be set too low
for grass condition. Raise cutting height.
Mower is too hard to Release bail handle to turn mower off. Remove
push.
safety key and battery pack. Raise cutting
height to reduce deck drag on grass. Check
each wheel for free rotation
Mower is abnormally Release bail handle to turn mower off. Remove
noisy and vibrates. safety key and battery pack. Turn mower on
side and check blade to ensure it has not been
bent or damaged. If blade is damaged, replace
with a BLACK+DECKER replacement blade.
If the underside of the deck is damaged, return
mower to a BLACK+DECKER Authorized
service center.
If there is no visible damage to the blade and
the mower still vibrates:
Release bail handle to turn mower off.
u
Remove safety key and battery pack.
u
Disassemble entire blade assembly as
u
described in the "Removing and installing
blade" section.
Remove any debris and clean each
u
piece.
Replace each piece as described in the
u
"Removing and installing blade" section.
If mower still vibrates, return the mower to
an authorized BLACK+DECKER authorized
service center.
Battery charger LEDs Check plug connection.
not on.
Replace charger.
Mower not picking up Chute clogged. Release bail handle to turn
clippings with bag. mower off. Remove safety key and battery
pack. Clear chute of grass clippings.
Raise cutting height of wheels to shorten
length of the cut.
Bag full. Empty bag more often.
Protecting the environment
Z
Separate collection. Products and batteries
marked with this symbol must not be disposed of
with normal household waste.
Products and batteries contain materials that can be recov-
ered or recycled, reducing demand for raw materials. Please
recycle electrical products and batteries according to local
provisions. Further information is available at
www.2helpU.com
Technical data
Input Voltage V
DC
16
All manuals and user guides at all-guides.com
CLMA4825L2 H1
36V
No-Load Speed
min
-1
Weight kg
Battery
Voltage V
DC
Capacity
Ah
Type
Charger
Input Voltage V
AC
Output Voltage V
DC
Current mA
Approx. charge time min
Hand/arm weighted vibration value:
= < 0,5 m/s , uncertainty (K) = 1,5 m/s
2
L (sound preasure) 75 dB(A)
PA
uncertainty (K) = 3.0 dB(A)
EC declaration of conformity
MACHINERY DIRECTIVE
%
OUTDOOR NOISE DIRECTIVE
CLMA4825L2 Autosense lawn mower
Black & Decker declares that these products described under
"technical data" are in compliance with:
2006/42/EC, EN60335-1:2012 + A11:2014 + A13:2017 +
A1:2019 + A14:2019 + A2:2019, EN60335-2-77:2010.
2000/14/EC, Lawn Mower, L < 50cm, Annex VI,
DEKRA Testing and Certification GmbH,
Handwerkstraße 15, 70565 Stuttgart
Location Certification Body,
Dinnendahlstr. 9, 44809 Bochum Germany
Notified Body number: 0158
L (measured sound power level) 88 dB(A),
WA
Uncertainty (K) = 0.9 dB(A),
L (guaranteed sound power) 96 dB(A).
WA
These products also comply with directive
2014/30/EU,2011/65/EU.
CLMA4825L2 H1
2900
net weight 21.24KG gross 25.95KG
BL2536
36
2.5
Li-Ion
90616337-xx
230
36
1300
110
.
2