Bosch 0601069100 Notice Originale page 16

16 | English
Laser receiver
Max. altitude
Max. relative humidity
Pollution degree according to IEC 61010-1
Battery
Approx. operating time
Weight according to
EPTA-Procedure 01:2014
Dimensions (length × width × height)
Protection rating
A) The working range may be reduced by unfavourable environmental conditions (e.g. direct sun-
light).
B) Dependent on the distance between the laser receiver and the line laser
C) Only non-conductive deposits occur, whereby occasional temporary conductivity caused by
condensation is expected.
The serial number (12) on the type plate is used to clearly identify your measuring tool.
Noise Information
Typically the A-weighted sound pressure level of the audio signal is 80 dB(A)
at 1 m away.
Do not hold the measuring tool to your ear.
Fitting
Inserting/changing the battery
It is recommended that you use alkaline manganese batteries to operate the measuring
tool.
Pull the locking mechanism (11) of the battery compartment cover outwards and lift up
the battery compartment cover (13). Insert the battery.
When inserting the batteries, ensure that the polarity is correct according to the illustra-
tion on the inside of the battery compartment.
If the battery warning (e) appears on the display (4) for the first time, the measuring tool
can still be operated for approximately another two hours.
Take the battery out of the measuring tool if you do not intend to use the tool for
u
a long time. The battery can corrode and self-discharge during prolonged storage.
1 609 92A 7SG | (18.05.2022)
2000 m
1 × 9 V (6LR61)
0.27 kg
74 × 41 × 150 mm
IP 54 (dust- and splash-proof)
Bosch Power Tools
LR 2
90 %
C)
2
30 h