Helios KWL 45 STS-HS Notice De Montage Et D'utilisation page 30

Installation and operating instructions
UK
CHAPTER 3
TECHNICAL DATA
Control set KWL 45 STS-UP/HS
3.0 Technical data
– KWL 45 BEU controller
Voltage/frequency
Max. current
Ventilation stages
Operating modes
Control line (analogue)
Protection category
Dimensions (mm)
Ref.no.
– KWL 45 SNU switching power supply
Input voltage
Operating voltage range
Output voltage
Integrated overtemperature protection
Overload protection, current limiter
Power loss standby
Short-circuit protection
Overvoltage protection
Ambient temperature range
Maximum surface temperature at Tc point
Relative humidity
Storage temperature
Safety:
Input side
Output side
Safety approval
– KWL 45 SNH switching power supply
Input voltage
Operating voltage range
Output voltage
Integrated overtemperature protection
Overload protection, current limiter
Power loss standby
Short-circuit protection
Overvoltage protection
Ambient temperature range
Maximum surface temperature at Tc point
Relative humidity
Safety:
Input side
Output side
Safety approval
3.1 Accessories
KWL-APG
Casing for surface mounting
Dimensions mm W 83 x H 83 x D 41
Ref.no. 4270
12 V / DC
3.0A
5
3
J-Y (ST) Y 2 x 2 x 0.8 mm
IP 20
W 80 x H 80 x D 37
3041
230V AC / 0,24A
207-253V AC
12.0V DC / 1.9A
> 2.5 A
max. 0.5 W
Output side, automatic restart
Output side, snap-in,
mains disconnection required
-5 °C to +40 °C or
+85 °C
5-95 % (non-condensing)
-40 °C to 85 °C
Protection class II
Protection class III
Safety extra-low voltage SELV compliant
acc. to EN60950-1 and EN60335-1
230V AC / 0.2A
100-240V AC
12.0V DC / 1.5A
-
>2.6A
0.4
Voltage reduction to I
Automatic restriction to max. 25V
-25 °C to +70 °C
95 % (non-condensing)
-40 °C to +85 °C
Protection class II
Protection class III
Safety extra-low voltage SELV compliant
acc. to EN60950-1 and EN60335-1
5
50 / 60Hz
47-63Hz
23W
50 / 60Hz
50-60Hz
18W
2.6A
max.