Cutting Height Adjustment Lever; Seat; Fueling; Release Lever - Husqvarna R 120S Manuel D'utilisation

Cutting height adjustment lever

The cutting height can be adjusted to 5 (1-5) different
positions with the cutting height lever.
Never use position S when mowing. This position is for
mower deck servicing only.
Lift up the cutting unit before adjusting the height.

Seat

The seat has a jointed attachment on the front edge and can
be tipped forward.
The seat can also be adjusted lengthways.
Loosen the bolts under the seat and adjust it forwards or
backwards to the desired position.

Fueling

The engine runs on unleaded petrol with a minimum octane
rating of 85 (not mixed with oil). We recommend the use of
biodegradable alkylate petrol. Do not use petrol that contains
methanol.
Do not fill the tank completely, leave an expansion area of at
least 2.5 cm (1").
WARNING! Petrol is highly inflammable.
!
Exercise care and refuel outdoors (see
safety instructions).
14 –
English
PRESENTATION

Release lever

The release control must be pulled out in order for the
machine to be moved when the engine is shutoff. Pull the
controls to the end positions, do not use an intermediate
position.
• Pull out the control to disengage the drive system.
• Push in the control to engage to the drive system.