Key To Symbols; Symbols - Husqvarna R 120S Manuel D'utilisation

Symbols

These symbols are on the machine and in the instructions.
WARNING! Careless or incorrect use can
result in serious or fatal injury to the
operator or others.
Please read the operator's manual
carefully and make sure you understand
the instructions before using the machine.
Always wear:
• Approved hearing protection
Reverse
Neutral
Fast
Slow
Stop the engine.
Battery
Choke.
Oil level
Cutting height
Backwards
Forwards
Ignition
Warning: rotating parts. Keep hands and feet
clear.

KEY TO SYMBOLS

Clutch engaged, blades turning
Clutch disengage, blades not turning
Parking brake
Brake
Clutch
Rotary blades Keep hands and feet
away from under the hood when the
engine is running
Do not use the Rider on ground that
slopes more than 10° .
Never use the machine if persons,
especially children, or animals, are in the
vicinity
Never carry passengers on the machine or
equipment
Drive very slowly if no cutting unit is fitted
Before and during reversing
procedures, look behind you.
Switch off the engine and take off the ignition
cable before repairs or maintenance
>10
– 5
English