Publicité
Les langues disponibles
Les langues disponibles
OPERATING INSTRUCTIONS
CONTROL PANEL
1. Swing and wireless connect button:
• Press to start the auto swing feature. When auto swing is activated, press again to stop the louver at the
desired angle.
• Press and hold for three seconds to start using the wireless connect feature.
2. Fan button:
• Press to select fan speed. Light will indicate current speed.
• Press and hold for 3 seconds to turn the continuous fan on or off.
3. Timer button: Press to start the automatic timer. Light will indicate whether a timer is set.
4. Temperature control buttons:
• Used to set the temperature and timer.
• Press and hold both temperature control buttons for three seconds to change the temperature display
from °C to °F.
5. LED display:
• Shows the set temperature in °C or °F.
• Shows the timer settings.
• While on dry mode, shows the relative humidity.
• When on fan mode, shows the room temperature.
6. Sleep and fi lter button:
• Press to start the sleep feature.
• The fi lter light will illuminate after 250 hours of use as a reminder to clean the fi lter; to reset the fi lter
after cleaning, press and hold the sleep button for three seconds.
7. Mode button: Press to select the desired mode. Modes will cycle in sequence with each press of the
button; auto, cool, dry, fan. Light will indicate current mode.
8. Power button: Press to turn the appliance on or off.
1
2
3sec
3sec
3
5
6
4
3sec
10
7
8
Publicité
