Publicité
Les langues disponibles
Les langues disponibles
moving parts. Loose clothes, jewellery or long hair
can be caught in moving parts.
•
If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection
can reduce dust-related hazards.
•
Do not let familiarity gained from frequent use of
tools allow you to become complacent and ignore
tool safety principles. A careless action can cause
severe injury within a fraction of a second.
Product use and care
•
Do not force the product. Use the correct product
for your application. The correct product will do the
job better and safer at the rate for which it was
designed.
•
Do not use the product if the switch does not turn
it on and off. Any product that cannot be controlled
with the switch is dangerous and must be repaired.
•
Disconnect the plug from the power source and/or
remove the battery pack, if detachable, from the
product before making any adjustments, changing
accessories, or storing the product. Such preventive
safety measures reduce the risk of starting the
product accidentally.
•
Store idle the product out of the reach of children
and do not allow persons unfamiliar with the product
or these instructions to operate the product. The
product is dangerous in the hands of untrained
users.
•
Maintain the product and accessories. Check for
misalignment or binding of moving parts, breakage
of parts and any other condition that may affect the
power tool´s operation. If damaged, have the product
repaired before use. Many accidents are caused by
poorly maintained power tools.
•
Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
•
Use the product, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to
be performed. Use of the product for operations
different from those intended could result in a
hazardous situation.
•
Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.
Battery tool use and care
•
Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used
with another battery pack.
•
Use products only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
8
•
When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause
burns or a fire.
•
Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from
the battery may cause irritations or burns.
•
Do not use a battery pack or tool that is damaged or
modified. Damaged or modified batteries may exhibit
unpredictable behavior resulting in fire, explosion or
risk of injury.
•
Do not expose a battery pack or tool to fire
or excessive temperature. Exposure to fire or
temperature above 130 °C / 265 °F may cause
explosion.
•
Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specified in the instructions. Charging
improperly or at temperatures outside the specified
range may damage the battery and increase the risk
of fire.
Service
•
Let only approved service center do servicing with
approved replacement parts. This will keep the
product safe.
•
Do not do servicing or open battery packs. Only
approved service center must do servicing of battery
packs.
Maintenance schedule on page 18 for
•
Refer to
more information.
Safety instructions for assembly
WARNING:
instructions that follow before you assemble
the product.
•
Unauthorized modifications and/or accessories may
lead to serious injury or death to the user or others.
•
Use only attachments as described in this manual.
Use only manufacturers recommended attachments.
•
Make sure that the assembly area is firm, so the
product does not tip over. Risk of personal and
material injury.
•
Be careful, the toggle fasteners can cause damage
to the operator when assembling the product.
Safety instructions for operation
WARNING:
instructions that follow before you use the
product.
Read the warning
Read the warning
1618 - 006 - 01.06.2023
Publicité
