Husqvarna DE 110i H Manuel D'utilisation page 11

2. Do the daily maintenance. Refer to
schedule on page 18 .
3. Make sure that the work area is clean and bright.
4. Use personal protective equipment. Refer to
Personal protective equipment on page 9 .
5. Make sure that the product is installed correctly.
6. Make sure that the battery is fully charged.
To attach the dust extraction hose
WARNING:
prevent antistatic effects.
1. Open the hose connector.
2. Put the hose adapter in the hose connector.
3. Push the hose adapter until you hear a click to get it
in correct position.
1618 - 006 - 01.06.2023
Maintenance
Use an antistatic hose to
To remove the dust extraction hose
• Push the hose lock button (A) and pull the dust
extraction hose.
To attach and adjust the floor nozzle
1. Put the end of the handle fully into the shaft of the
floor nozzle.
2. Turn the knob (A) at the rear of the floor nozzle
to adjust the floor nozzle wheels. Different surfaces
and different types of dust and materials make it
necessary to adjust the wheels to get the best
performance.
A
A
11