Utility; Copying; Updates; Restore - Numark HDMIX Guide D'utilisation

Masquer les pouces Voir aussi pour HDMIX:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

UTILITY

The Utility button gives access to System information and
settings.
The main utility work area displays the unit serial number.
This information is useful if you need to contact Customer
Care or check for firmware updates at the Numark web
site.
Tip: It is strongly advised that you periodically compare
your firmware version with that available at the Numark
web site, and install any more recent version that may be
available. New software will be posted regularly to add
features and fix problems. See "HDMIX Software
Upgrades" section for details.
Further utility screens are accessed from the menu as follows.

Copying

The Copying page shows the files in the copy queue – that
is, the tracks that are currently or waiting to be copied to the
HDMIX.
The progress bar at the bottom of the screen
shows how much of the current track has been copied. Use
the Push Select knob to scroll through the copy queue.
Selecting "Remove" will remove a track from the copy queue.
Selecting "Cancel" will abort the current copying process and
clear the queue of all tracks (a dialog box will ask you to confirm
or cancel this command).

Updates

The Updates page shows the current software version of
the HDMIX. Please check http://www.numark.com regularly
for available software upgrades.
software upgrade on the website is higher than the version
of the current software on your HDMIX, please follow the
upgrade procedure outlined in the next section of this
manual.

Restore

This operation will reset the unit to default settings. Select
Restore to proceed, or press Utilty or another function
button to cancel. Just to be really sure, you will be asked one
more time if this is something you want to do. Select Yes or
No as appropriate.
The default settings are:
Pitch Range 12%
Track Loading - Manual
Time Display - Elapsed
Fader Start - Off
Display Brightness – Center Position
Note that the calibration (see below) will not be reset by this operation.
If the version of the
34

Publicité

Table des Matières
loading

Table des Matières