Utility; Display; Restore - Numark iDJ2 Guide D'utilisation

UTILITY

The Utility button gives access to System information and settings.
The main utility work area displays the unit serial number.
This information is useful if you need to contact Customer
Care or check for firmware updates at the Numark web site.
Tip: It is strongly advised that you periodically
compare your firmware version with that available at
the Numark web site, and install any more recent
version that may be available. New software will be
posted regularly to add features and fix problems. See
"iDJ² Software Upgrades" section for details.
Further utility screens are accessed from the menu as follows.

Display

From here the display brightness can be adjusted.
Also, a scale of shades from black to white is shown on
screen as an aid to setting the display contrast. Adjust the
contrast by rotating the PUSH TO ENTER knob until the left
most segment of the scale is black, the right most is white,
and three shades can be identified in between.

Restore

This operation will reset the unit to default settings. Select
Restore to proceed, or press Utilty or another function
button to cancel. Just to be really sure, you will be asked one
more time if this is something you want to do. Select Yes or
No as appropriate.
The default settings are:
Pitch Range 12%
Track Loading - Manual
Time Display - Elapsed
Fader Start - Off
Display Brightness - Center position
Note that the calibration (see below) will not be reset by this operation.
33