Zephyr ARC Serie Guide D'utilisation, D'entretien Et D'installation page 9

CHOOSE AIR OUTLET
LOCATION
The hood is supplied with upper air outlet;
but you can let the air out the back, turning
the motor plate.
Rotation of the motor plate:
1.Remove the motor plate unscrewing (6)
screws (Fig.11).
2.Rotate the motor plate and re-fix in the new
position (Fig.12).
In the installation with internal blower, use
the rond knockout (B);
in the installation with remote or In-line
blower, use the other knockout (A).
INSTALLATION INTERNAL
BLOWER
NOTE: The following instructions are for
installing the internal blower only.
Install this range hood only with internal blower
model CBI-290A or CBI-600A.
1. Remove the knockout (B). Fig. 13.
2. Fix the internal blower with (4) mounting
screws (supplied with the internal blower).
Fig. 13.
All manuals and user guides at all-guides.com
- 17 -
KNOCKOUT KNOCKOUT
(B) (A)
(4) MOUNTING SCREWS
(Supplied with the motor)
KNOCKOUT
(B)
FIG.11
FIG.12
FIG.13