Zephyr ARC Serie Guide D'utilisation, D'entretien Et D'installation page 21

32). Remove the charcoal filter holders
(Fig.34). Remove also the charcoal filter
located in the lower mesh filter.
2. To install the CHARCOAL filters, place it
over the mesh filter and lock it with a
charcoal filter holders (Fig.34). Make sure
the filter is securely engaged after
assembly.
3. Install MESH filters after charcoal filters
are installed.
4. The charcoal filters replacement model
ZOF-02AC.
is
Model Wave
1. To remove the CHARCOAL filter, open
the upper front glass (Fig.33) and remove
the mesh filter. Grip and push charcoal
filter tab toward rear of hood. Pull the filter
down to disengage the rear filter tabs
(Fig.33).
2. To install the CHARCOAL filter, align filter
in rectangular opening (Fig.35). Push filter
against springs in rear of hood and press
into place. Make sure the filter is securely
engaged after assembly.
3. Install MESH filter after charcoal filter is
installed.
4. The charcoal filter replacement model is
ZOF-01AC.
All manuals and user guides at all-guides.com
- 29 -
CHARCOAL FILTER HOLDER
CHARCOAL FILTER
MESH FILTER
CHARCOAL FILTER
Model Incline
FIG.34
Model Wave
FIG.35