Sony STR-DA5300ES Mode D'emploi page 13

Name Function
Q F1/F2 Press TV (wk), then press F1 or
F2 to select a component to
operate.
• HDD recorder
F1: HDD
F2: DVD player, Blu-ray Disc
Player
• DVD/VHS combo player
F1: DVD player, Blu-ray Disc
Player
F2: VHS
Press AMP (5), then press
MACRO1,
MACRO 1 or MACRO 2 to set
MACRO2
up the macro function
(page 130).
Press TV/INPUT and TV (wk)
TV/INPUT
at the same time to select the
input signal (TV input or video
input).
Press repeatedly to select the
WIDE
wide picture mode.
Press SHIFT (wj), then press
PIP
PIP to switch the image of the
PIP (Picture in Picture) window.
The image will be changed as
follows. EXT VIDEO t
ZONE 2 VIDEO t OFF. You
can swap the position of the
main screen and the PIP
window (swap) by pressing the
(qa). You can expand or
shrink the window using V/v
(qa). You can also change the
window's position using B/b
(qa).
Note
The HDMI video signals are not
output while the PIP window is
displayed.
RESOLUTION Press SHIFT (wj), then press
RESOLUTION repeatedly to
change the resolution of signals
output from the HDMI OUT or
COMPONENT VIDEO
MONITOR OUT jack
(page 94).
Name Function
R DVD/ Press to display the menus of
the DVD player on the TV
TOP MENU,
screen. Then use V/v/B/b and
MENU
to perform a menu
operations (page 125).
Press AMP (5), then press
NIGHT
NIGHT MODE to activate the
MODE
NIGHT MODE function
(page 73).
Press AMP (5), then press
INPUT
INPUT MODE to select the
MODE
input mode when the same
components are connected to
both digital and analog jacks
(page 99).
Press SHIFT (wj), then press
SLEEP
SLEEP to activate the sleep
timer function and the duration
which the receiver turns off
automatically (page 106).
TEST TONE Press SHIFT (wj), then press
TEST TONE to output the test
tone from each speaker.
S MUTING Press to turn off the sound
temporarily. Press the button
again to restore the sound.
T MASTER Press to adjust the volume level
of all speakers at the same time.
VOL +/–
Press TV (wk), then press TV
TV VOL +/–
VOL +/– to adjust the volume
level of the TV.
U DISC SKIP Press to skip a disc when using
a multi-disc changer.
V RETURN/ Press to return to the previous
menu or exit the menu while the
EXIT O
menu or on-screen guide of the
VCR, DVD player, or satellite
tuner is displayed on the TV
screen.
W DISPLAY Press to select information
displayed in the display
window, TV screen of the VCR,
satellite tuner, CD player, DVD
player, Blu-ray Disc Player, or
MD deck.
Note
In the SCREEN mode, press the
button to display the menu on
the TV screen.
continued
13 GB