Télécharger Imprimer la page

Wilo CronoNorm NL Notice De Montage Et De Mise En Service page 63

Masquer les pouces Voir aussi pour CronoNorm NL:

Publicité

Les langues disponibles

Les langues disponibles

5.2
Technical data
Property
Nominal speed
Nominal diameters, DN
Permissible min./max. fluid temperature
Permissible min./max. fluid temperature
Max. ambient temperature
Max. permissible operating pressure
Insulation class
Protection class
Flanges
Approved fluids
Electrical connection
Special voltages/frequencies
Motor protection
Tab. 1: Technical data
Fluids
Installation and operating instructions Wilo-CronoNorm-NL, NLG
Value
2900, 1450, 960 rpm
NL:
32 - 150
NLG: 150 - 300
NL:
-20 °C to +120 °C
NLG: -20 °C to +120 °C
NL:
-20 °C to +105 °C
NLG: -20 °C to +105 °C
+ 40 °C
16 bar
F
IP 55
NL:
PN 16 in acc. with DIN EN 1092-2
NLG: PN 16 in acc. with ISO 7005-2
• Heating water according to VDI 2035
• Cooling/cold water
• Water/glycol mixture up to 40% vol.
• Heat transfer oil
• Other fluids (on request)
3~400 V, 50 Hz
Pumps with motors with different volt-
ages or with other frequencies are avail-
able on request.
PTC thermistor sensor
Please state all the information on the pump name plate when order-
ing spare parts.
If water/glycol mixtures with up to 40% glycol (or fluids with viscosi-
ties different from pure water) are used, the pump data must be cor-
rected accordingly (depending on the percentage mixture ratio and
fluid temperature). The motor power must also be adjusted if neces-
sary.
• Only use mixtures with corrosion inhibitors. The respective manufac-
turer's instructions are to be observed.
• The fluid must be free of sediments.
• Wilo's approval must be obtained for use of other media.
• Mixtures with a proportion of glycol of > 10% influence the Δp-v
pump curve and the flow calculation.
NOTE:
The safety data sheet of the pumped fluid must always be observed!
English
Remarks
Design with seal ring classifi-
cation
Design with stuffing box
packing
• Standard version
• Standard version
• Standard version
• Special version or auxiliary
equipment (at additional
charge)
• Special version or auxiliary
equipment (at additional
charge)
Standard version
Special version or auxiliary
equipment (at additional
charge)
62

Publicité

loading

Ce manuel est également adapté pour:

Crononorm nlg