Publicité
Les langues disponibles
Les langues disponibles
GROUP S.P.A.
• ACTUATOR CONTROL ART. 1256
Actuators can be activated in standby mode and during conversation with an external unit.
Attention! Only actuators Art. 1256 on the incoming line to terminals LP-LP of 1998A can be actuated.
OPERATION
Starting condition:
standby.
Press key
Press the key
to confirm.
N.B.: Do not use this function if no actuator is installed as it will interrupt the communication.
• SPEED NUMBERS
OPERATION
Starting condition:
standby.
EXAMPLE: If you want to call internal extension 2 by means of speed number 1.
N.B: code 002 must have been previously memorised under speed number 1(see SPEED NUMBERS in chapter 3).
Press key
1
MT SB 01
40
All manuals and user guides at all-guides.com
ACTUATING AN ACTUATOR IN STANDBY/CONVERSATION MODE
DISPLAY
A
(----) 21:40
WED 12/03/07
ACTUATOR CODE
A
(----) 21:40
WED 12/03/07
Or
ACTUATOR
NOT AVAILABLE
DISPLAY
A
(----) 21:40
WED 12/03/07
CALLING
USER 002
Or
USER 002
NOT AVAILABLE
Or
BUSY
USER
DESCRIPTION
To activate a specific actuator, enter its code. If
no code is given, a generic actuator is
activated (see FT/SB2/02)
The actuator has been activated.
The actuator is not available.
DESCRIPTION
The call takes place correctly.
The call did not take place correctly.
The system is engaged.
Publicité
