Comelit Simplebus MT SB 01 Manuel Technique page 34

GROUP S.P.A.
OPERATION
Starting condition:
standby.
Press the MENU key
Use the ▼ ▲
keys to select the desired menu.
Press key
3
DEF
to select the desired option.
(DAY NIGHT AUTOMATIC)
Press key ▼
Press key
3
DEF
to select the desired option.
(WEEK PROGRAM)
Press key ▼ to select one of the 3 operating
modes
Press the OK key to confirm the entry.
To pass on to the next day, press the OK key.
4) OPERATION
• DAY MODE
In DAY mode (see Figure 1 key 13, page 3) the system intercepts all calls from external units and internal extensions. In standby mode,
the display shows the following information:
SWITCHBOARD IN AUDIO MODE
• NIGHT MODE
In NIGHT mode (see Figure 1 key 13, page 3) the system only intercepts calls from an external unit if they are addressed to the
switchboard itself (code 240). External calls to other addresses are forwarded without the system intervening, but are shown on the
display. Incoming calls from internal extensions are all managed normally.
In standby mode, the display shows the following information:
SWITCHBOARD IN AUDIO MODE
MT SB 01 32
All manuals and user guides at all-guides.com
PROGRAMMING THE WEEK
DISPLAY
A NIGHT 21:40
WED 12/03/07
1-CHANGE TIME
2-CHANGE DATE
3- DAY NIGHT
AUTOMATIC
1-ON/OFF
2-SET TIMES
3-WEEK
PROGRAM
MONDAY
MODE: AUTO
MONDAY
MODE: DAY
TUESDAY
MODE: AUTO
SWITCHBOARD IN DAY MODE
A (——) 21:40
WED 12/03/07
SWITCHBOARD IN NIGHT MODE
A NIGHT 21:40
WED 12/03/07
DESCRIPTION
Repeat the same operations for each day of the
week. To exit the menu, press the ESC key.
ATTENTION: days programmed to operate in AUTO
mode will all have the same time bands set. See
"Setting times in auto mode"