Nice OLTRE1824 Instructions Et Avertissements Pour L'installation Et L'utilisation page 9

DISPOSAL OF THE PRODUCT
This product is an integral part of the automation and therefore must
be demolished with it.
As for installation, the plant must also be demolished by qualified staff at the
end of its life span.
This product is made up of various types of materials: some can be re-cycled,
others must be disposed of. Obtain information regarding recycling or disposal
systems envisioned by the Standards in force on your territory for this category
of product.
Attention! – some parts of the product can contain pollutant or dangerous
substances which, if dispersed into the environment, could have damaging ef-
fects on the same and human health.
As indicated by the symbol at the side, it is prohibited to throw
this product into domestic waste. "Separate collection" must be
performed for disposal, according to the methods envisioned by
the Regulations in force on your territory or take the product back
to your dealer on the purchase of a new equivalent product.
Attention! – local regulations in force may envision heavy sanctions if this
product is disposed of abusively.
PRODUCT TECHNICAL FEATURES
RECOMMENDATIONS • All technical features stated make reference at a
room temperature of 20°C (± 5°C). • Nice S.p.A. reserves the right to modify
the product at any time it deems necessary, however maintaining the same
functionality and destination of use.
n Type: Electro-mechanical dear motors for gates and doors with hinged panels
n Power input: 24 V
n Nominal absorption: 1 A
n Maximum absorption: 2.9 A
n Nominal power: 25 W
n Maximum power: 70 W
n Protection rating: IP 67
n Run: 0°...120° (±10°)
n Nominal speed: 1.5 rpm
n Nominal torque: 60 Nm
n Maximum torque: 150 Nm
n Functioning temperature: -20°C...+50°C
n Cycles/hour at the nominal torque: 60
n Dimensions: 305 x 145 x 346
n Weight (kg): 5.5
All manuals and user guides at all-guides.com
CE declaration of conformity and declara-
tion of incorporation of "partly-completed
machinery"
Declaration in accordance with Directives: 2014/30/UE (EMC);
2006/42/EC (MD) annex II, part B.
Note - The content of this declaration corresponds to the declaration
made in the official document filed in the offices of Nice S.p.A., and par-
ticularly the latest version thereof available prior to the printing of this
manual. The text contained here has been adapted to meet editorial re-
quirements. A copy of the original declaration may be requested from
Nice S.p.A. (TV) Italy.
Declaration number: 589/OLTRE
Revision: 0
Language: EN
Name of manufacturer: NICE S.p.A.
Address: Via Pezza Alta N°13, 31046 Rustignè di Oderzo (TV) Italy.
Person authorized to provide technical documentation: NICE
S.p.A. – Via Pezza Alta N°13, 31046 Rustignè di Oderzo (TV) Italy.
Product type: 24Vd.c. electro-mechanical gear motor for swing gates.
Model / Type: OLTRE1824
Accessories:
The undersigned Roberto Griffa, as Chief Executive Officer, hereby de-
clares under his own responsibility that the products identified above
comply with the provisions of the following directives:
• DIRECTIVE 2014/30/UE OF THE EUROPEAN PARLIAMENT AND
COUNCIL of February 26 2014 concerning alignment of Member
States' legislation regarding electromagnetic compatibility (consoli-
dated text), according to the following harmonized standards:
EN 61000-6-2:2005; EN 61000-6-3:2007 + A1:2011.
The product also complies with the following directive in accordance
with the requirements for "quasi-machines":
• Directive 2006/42/EC OF THE EUROPEAN PARLIAMENT AND
COUNCIL of May 17 2006 regarding machines and amending direc-
tive 95/16/EC (consolidated text).
– I declare that the pertinent technical documentation has been pre-
pared in accordance with Annex VII B to Directive 2006/42/EC and
that the following essential requirements have been met:
1.1.1 - 1.1.2 - 1.1.3 - 1.2.1 -1.2.6 - 1.5.1 -1.5.2 - 1.5.5 - 1.5.6 - 1.5.7
- 1.5.8 - 1.5.10 - 1.5.11.
– The manufacturer agrees to send the national authorities pertinent in-
formation on the "quasi-machine" in response to a motivated request
without affecting its intellectual property rights.
– If the "quasi-machine" is operated in a European country with an offi-
cial language other than the language used in this declaration, the im-
porter must associate a translation with this declaration.
– The "quasi-machine" must not be operated until the final machine in
which it is to be incorporated is declared to conform to the provisions
of Directive 2006/42/EC, if applicable to it.
The product also complies with the following standards:
EN 60335-1:2002 + A1:2004 + A11:2004 + A12:2006 + A2:2006 +
A13:2008 + A14:2010 + A15:2011; EN 60335-2-103:2003 + A11:2009.
The parts of the product which are subject to the following standards
comply with them: EN 13241-1:2003 + A1:2011; EN 12445:2000;
EN 12453:2000; EN 12978:2003 + A1:2009.
Oderzo, April 21 2016
Ing. Roberto Griffa
(Chief Executive Officer)
English – 3