Publicité
Les langues disponibles
Les langues disponibles
Troubleshooting.
You have doubts about whether your induction hob is working correctly. This does not necessarily mean there is a break-
down. Nevertheless, check the following points.
YOU NOTICE THAT...
The induction wok is not working. The indicator lights on the key-
board do not light up.
When you turn the induction wok on the indicator lights on the key-
board keep flashing.
The induction wok stopped working during cooking.
The timer may indicate the message
The wok does not work.
The ventilation continues for a few minutes after the wok has been turned
off.
Just after being connected, the ventilation comes on for a few seconds.
In the event of a fault, note down the message given by the timer and refer to the fault chart.
Do not be surprised if the glass surface of your wok is always slightly warm. This is normal.
In all events, if your intervention proves insufficient, contact the After-Sales Service immediately.
All manuals and user guides at all-guides.com
POSSIBLE CAUSES
The appliance is not being supplied. The electricity supply or the
connection is faulty.
The pan you are using is not suited to induction cooking.
The electronic circuits are over heated.
The electronic circuits have broken down.
Cooling the electronics.
Automatic testing of product.
22
WHAT SHOULD YOU DO?
Check the electrical installation. Inspect the fuses and the circuit
breaker.
Use a compatible pan (see list provided).
Check the conformity of your installation and especially the air in-
lets and outlets, as indicated in the instructions.
Contact the After-Sales Service.
This is normal.
This is normal.
Publicité
