Télécharger Imprimer la page
Velleman CS10MD Mode D'emploi
Masquer les pouces Voir aussi pour CS10MD:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Liens rapides

CS10MD –HAND-HELD METAL DETECTOR
1. Introduction
Thank you for buying the CS10MD metal detector. Read this manual carefully before bringing it into service. The
CS10MD is a hand-held metal detector designed for leisure activities. Typical uses will include body and parcel
search for metal objects, wherever hidden metal can be detected.
2. Operation
- The CS10MD operates on one 9V standard or rechargeable battery. To install the battery, slide off the battery
cover at the bottom of the handle, attach the battery correctly to the connector, place it into its compartment and
slide the cover back on.
- Turn the unit on by setting the on/off switch to "I" – simultaneously the green LED lights up.
- You can modify the sensitivity and depth range by turning the small screw, located under the small hole at the
front side, just above the handle. You need a fine crosshead screwdriver to turn it. Turn the sensitivity adjuster
clockwise until the red LED lights up and a constant audio tone is heard. Then, turn the screw counterclockwise
until the red LED just goes out and the tone fades. Now, the detector is tuned for optimum sensitivity and range.
- Sweep the detector backwards and forwards continuously at a height of 10-30mm above the area to be scanned.
- The presence of metal will be indicated by the audio warning tone and the red light coming on. If the detector is
held still over a metal object, the detection signal will automatically fade. Therefore, it is important that the unit is
continually scanning the surface when in use.
3. Performance
The sensitivity of the detector is determined primarily by the size, shape and composition of the object to be
detected.
Typical performance figures are:
Object
palmtop computer
metal pen
small key
4. Headphones Socket
The detector is equipped with a headphones socket, located at the side. Headphones or an earphone can be used in
noisy work situations or in places where the audio tone should not be heard in the surrounding area.
5. Socket for Rechargeable Battery
- ONLY when using a RECHARGEABLE (e.g. nickel-cadmium) BATTERY (so NOT with ALKALINE-batteries), you
can recharge the battery by connecting the metal detector to an appropriate 9V adapter (see its specifications).
- While recharging, the unit must be turned off. If the metal detector is turned on wile connected to the adapter, it
will permanently detect the adapter wire, which is of no use.
- It takes four to six hours to fully charge the battery. The adapter socket is located next to the headphones socket.
Maximum detection range
Low sensitivity
20cm
10cm
5cm
Optimum sensitivity
28cm
15cm
10cm

Publicité

loading

Sommaire des Matières pour Velleman CS10MD

  • Page 1 2. Operation - The CS10MD operates on one 9V standard or rechargeable battery. To install the battery, slide off the battery cover at the bottom of the handle, attach the battery correctly to the connector, place it into its compartment and slide the cover back on.
  • Page 2 2. Bediening - De CS10MD werkt op een gewone of herlaadbare 9V batterij. Om de batterij te plaatsen verwijdert u het delkseltje onderaan de handgreep, bevestigt u de batterij correct op de connector, plaatst u batterij en connector in de voorziene ruimte en schuift u het dekseltje terug op zijn plaats.
  • Page 3: Hoofdtelefoonaansluiting

    CS10MD – DÉTECTEUR DE MÉTAUX PORTABLE 1. Introduction Nous vous remercions de votre achat ! Lisez le manuel attentivement avant de prendre votre CS10MD en service. Le CS10MD est un détecteur de métaux portable à haute performance, qui a été conçu pour utilisation non professionnel.
  • Page 4: Sortie Casque

    - Quand le détecteur fait une détection, le LED rouge s’allumera et un ton sonnera. Quand le détecteur est tenu immobile au-dessus d’un objet, la détection s’arrêtera automatiquement. Il est donc important que vous balayez constamment avec le détecteur. 3. Performance La sensibilité...
  • Page 5 2. Operación - El CS10MD funciona con una pila de 9V normal o recargable. Para instalar la pila, quite la tapa en la parte inferior del mango, fije la pila correctamente al conector, colóquela en el compartimiento previsto y vuelva a cerrar la tapa.
  • Page 6 2. Betrieb - Der CS10MD funktioniert mit einer 9V-Standardbatterie oder einer wiederaufladbaren Batterie. Zum Einlegen der Batterie: schieben Sie den Batteriedeckel an der Unterseite des Handgriffs weg, befestigen Sie die Batterie richtig an der Anschlüsse, bringen Sie alles in das Batteriefach ein und schieben Sie den Deckel wieder auf.
  • Page 7: Technische Daten

    3. Leistung Die Empfindlichkeit des Detektors wird vor allem durch die Größe, die Form und die Zusammensetzung des zu detektierenden Objektes bestimmt. Typische Leistungswerte sind: Objekt Maximaler Detektionsbereich Niedrige Empfindlichkeit Optimale Empfindlichkeit Palmtop 20cm 28cm Kugelschreiber (Metall) 10cm 15cm kleiner Schlüssel 10cm 4.