Publicité
Les langues disponibles
Les langues disponibles
Alarm Recording (Emergency Recording)
Alarm Recording Operation
q
Check that a video cassette with its tab intact has
been inserted.
w
Set the MENU/REC LOCK switch to MENU to
display the menu screens. Press the page button to
display the alarm recording setting screen (Menu
Screen 3) on the TV monitor.
[ALARM]
DURATION : 30SEC
[RECALL]
e
Press the set (+ or –) button to display ALARM for
MODE.
MODE : ALARM
• If TAPE END on Menu Screen 4 has been set to REPEAT, the auto repeat recording mode is established when the
tape comes to the end. When auto repeat recording is to be performed, use an alarm recording interval setting
other than MANUAL.
• With emergency recording, set the unit to the POWER OFF or STOP mode.
Alarm Recall
The time when the alarm signal was input can be ascertained on the TV monitor by checking the alarm input time in
the RECALL item on Menu Screen 3.
q
Set the MENU/REC LOCK switch to MENU to
display the menu screens. Press the page button
to display the alarm recording setting screen (Menu
Screen 3) on the TV monitor.
[ALARM]
DURATION : 30SEC
[RECALL] 10-10-01 20:19
[OUTPUT SELECT]
TERMINAL OUT : ERR WARN
• The alarm recall function stores up to 4 alarm input times in the memory and displays them on the screen. If there
have been more than 4 inputs, they will be deleted from the screen in sequence starting with the oldest data.
• When the RESET button is pressed while Menu Screen 3 is on the display, the alarm recall memory can be cleared.
P3
MODE : OFF
-
-
-
P3
MODE : ALARM
9-14-01 12:05
8-30-01 08:40
6-25-01 04:14
r
Press the shift (
DURATION.
Press the set (+ or –) button to set the recording
duration.
DURATION : 30SEC
t
Upon completion of the settings, set the MENU/
REC LOCK switch to OFF. The regular screen is
restored.
y
Press the REC button.
If an alarm input signal is subsequently supplied,
the time mode set to 8H, and alarm recording
continues until the alarm is released.
w
Upon completion of the settings, set the MENU/
REC LOCK switch to OFF. The regular screen is
restored.
20
) button to move the flashing to
Publicité
