Salicru SLC TWIN PRO3 Mode D'emploi page 57

4.2. PRODUCT DEFINITION.
4.2.1. Naming convention.
SLC-4000-TWIN PRO3 GC M B1 UK 0/AB147 "EE29503"
MB TWIN PRO3 0/2x3AB147 3x40A EE521925
Note related to batteries, codes B0 and B1:
(B0) The unit is supplied without batteries, but with the
space kept for their installation in the UPS enclosure
in models that provide for it in their standard
version. For all other models, the battery block will
be installed in the way deemed most appropriate
(in a box, cabinet, rack, etc.).
For units ordered (B0), the purchase, installation and
connection of the batteries will always be borne by
the customer and will be
Accessories such as screws, cables or battery
connection plates are considered optional and can
be supplied upon request.
USER MANUAL
M
RT3
PRO3
SLC
CF
RT3
PRO3
MB
their responsibility.
Special unit
Unit without batteries, but with the necessary accessories
to install them.
The "UK" label is added to the packaging.
External batteries to the UPS, which has an extra charger.
IEC input and output sockets (seeTab. 1 ).
A terminal cover is added inside the packaging.
Rack-tower format.
I/O single-phase tower format.
Power in VA.
UPS
Frequency converter.
Special unit
Protection rating.
Number of circuit breakers in parallel.
Last 3 digits of the battery code.
Letters of the SALICRU battery family code.
Number of batteries of a single branch.
Number of battery branches in parallel.
Empty battery module. Includes accessories.
TWIN RT3 battery module series.
TWIN PRO3 or TWIN/3 PRO3 battery module series.
EBM battery module.
(B1) Device with a more powerful charger, which does
not have a battery pack, nor the possibility of
installing them in the same box.
If the battery module is required, it must be ordered
as a separate item, which will be connected to the
UPS using the supplied cable.
Before connecting a module or group of batteries to
the unit or another available module,
to check
that the voltage value printed on the back of
the device next to the battery connector is appropriate
and that the polarity between the means of connection
corresponds.
For more information, see section "5.3.3. Wiring with
external battery module (EBM)." of this document.
SLC TWIN PRO3/RT3 4÷10 kVA UNINTERRUPTIBLE POWER SUPPLIES (UPS)
it is necessary
57