Diono Cambria 2 Mode D'emploi page 25

3. Feed the shoulder belt portion of the vehicle seat
belt through the upper belt guide.
IMPORTANT:
When the shoulder belt is
•
routed through the upper belt
guide, pull some webbing out of
the retractor. Slowly release it to
make sure the belt property
feeds back into the retractor.
Do this between each use.
The vehicle shoulder belt should lay over the
•
shoulder and should NOT be touching the
child's neck.
4. Fasten vehicle seat belt across child.
The lap portion of the seat belt should
rest within both lower belt guides. Make
sure the vehicle seat belt is not twisted
and lays flat across child's hips, torso
and shoulder. DO NOT lay belt
high over the child's belly.
SECURING THE CHILD
diono.com
3
4
25