Diono Cambria 2 Mode D'emploi page 20

B. LATCH/UAS INSTALLATION
To improve safety and performance, this booster seat is
equipped with a lower anchorage system that allows
secure attachment to a vehicle's lower anchor locations.
DO NOT use LATCH/UAS if installation interferes with
vehicle seat belt.
IMPORTANT:
position, make sure it is does not rock from side-to-
side, otherwise choose a different seating position.
WARNING! Unsecured objects can become flying
hazards and can cause serious injury in an accident. If
your vehicle is equipped with lower anchors, Diono
always recommends installation utilizing the LATCH/
UAS connectors with this booster seat.
1. Disengage LATCH/UAS connectors from storage
slots and lay booster seat on its side. While
PRESSING the silver cam lock lever, pull LATCH/UAS
connectors away from the booster seat and extend
both straps. Do not overextend connector straps.
20
FIRST SETUP
When using booster seat in center seating