Publicité
Les langues disponibles
Les langues disponibles
How to remove and replace parts
•
Freezer
To remove the lamp cover, separate the shelf
compartment
over the lamp cover and pull the lamp cover
forwards ➁ while pressing the bottom side of
lamp
the lamp cover upwards ➀. Turn the bulb
counterclockwise.
Use a 40-watt bulb (max.) which can be purchased
at a service center.
Freezer
To remove a shelf, push the shelf to the left ,
lift the left part of the shelf a bit , lift the right
compartment
part up ➂ , and take it out.
shelf
Door rack and
Lift the door rack holding both sides
pull it out .
support
Ice storage bin
Hold the ice storage bin as shown in the right
figure and pull it out
Do not dismantle the ice storage bin unless
it is necessary.
Use both hands to remove the ice bin to avoid
dropping it.
After dispenser
The water collector has no self-draining
function. It should be cleaned regularly.
is used
Remove the cover by pulling the front side of
water collector cover and dry it with a cloth.
22
All manuals and user guides at all-guides.com
NOTE
Dismantling is done in the reverse sequence of assembly.
Be sure to unplug the power plug before dismantling and assembly.
Never apply severe force to dismantle parts. Parts may be damaged.
while slightly lifting it .
Care and Maintenance
1
1
and
2
3
2
2
1
Publicité
