All manuals and user guides at all-guides.com
InstallatIon
fig. 1
install the device with the power supply disconnected and with the pump motor
lying horizontally (the arrow on the pump housing shows the direction of flow)
(Fig . 1) .
When performing insulation work, ensure that the pump motor and the electronics
housing are not covered in insulation . if the installation location changes, you must
rotate the motor housing as follows (Fig . 2a to 2d):
· Unscrew the socket screw
· Rotate the motor housing
· Re-insert the socket screw and tighten
fig. 2a
fig. 2b
fig. 2c
fig. 2d
eveneS heatinG PUMP he-ht 45