Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
Venting programme
Pressing and holding the button (8-13 sec .) starts a venting programme that lasts
around four and a half minutes . the four Leds illuminate up and down as a chase,
and the programme goes through levels with varying speeds and duration . you
can end the process prematurely by pressing and holding the button again . the
pump will then return to the previously selected operating mode .
Button lock
Once the pump has been set, you have the option of activating a button lock . this
prevents the pump from being adjusted unintentionally . to activate the button lock,
press and hold the button until all Leds flash (approx . 20 sec .) .
One yellow Led will flash after approx . 3 seconds . after a further approx .
5 seconds, the green Leds will illuminate as a chase . after a further approx .
5 seconds, all yellow Leds will flash . after a further approx . 7 seconds, all Leds will
flash . this indicates that the button lock is activated .
to deactivate the button lock, press and hold the button until all Leds flash
(approx . 20 sec .) .
eveneS heatinG PUMP he-ht 39
Publicité
