Setting The Temperature Unit; Analog Inputs - JUMO eTRON M100 Notice De Mise En Service

2013-05-01

5.5 Setting the temperature unit

Parameters Meaning
Temperature unit (Unit)
for the displayed temperatures
A
When converting the temperature unit, all temperature values, e.g.
the actual values (in.1), (in.2) and the set point value (SP) are con-
verted accordingly.
Relative parameters referring to the temperature, e.g. the hysteresis
(HyS) or offset (ot.1), are also converted.

5.6 Analog inputs

Parameters Meaning
Probe on analog input 1 in 2-wire circuit
means customer-specific linearisation, which is not provided in this
device version.
Offset temperature analog input 1
Actual value offset
All manuals and user guides at all-guides.com
5 Parameter level
Value range
from..factory-setting..to
°C or °F
Value range
from...factory-set-
ting...to
Pt 100:
Pt 1000:
KTY1X-6:
KTY2X-6:
or
-50,0...0,0...50,0 in °C
or
-90,0...0,0...90,0 in °F
20
Your
setting