Kohler K-26070-LA Instructions D'installation page 4

1. Prepare the Site
Rough Plumbing
NOTICE: Measure your product for site preparation. Note the model number on the packaging label, then visit the
product page at kohler.com
NOTICE: Verify that the subfloor is level. Provide drain access from below. Provide access to all plumbing connections.
NOTICE: Provide adequate floor support.
NOTICE: An access panel will simplify future maintenance.
Construct an appropriately sized plumb stud alcove. Verify that the dimensions of the alcove account for the finished
wall.
Install the rough plumbing.
Position and install a standard PVC or brass drain pipe to the correct height.
1499222-2-A
Subfloor
to reference the product Specification Sheet.
Alcove Installation
4
Stud Framing
Kohler Co.