Askoll PURE M LED Manuel D'instructions page 3

Congratulations!
By purchasing an Askoll PURE
a fully made-in-Italy design that harmonises well with several interior
design styles, but you will also be able to rely on a product that con-
centrates the best of Askoll technology, a company that can boast
more than thirty years of experience in the design and production of
articles for aquariums and ponds.
In just a few minutes, after starting installation, we are sure that you
will appreciate a product conceived in every detail to make any op-
eration easy and fast. You will enjoy even more the moment in which
you will be able to dedicate your time to create a nature corner in
your new Askoll PURE Aquarium and you will be able to count on
LED
cutting edge devices to preserve the beauty of the aquatic world over
time, in a simple way.
Before starting, kindly read and follow the warnings and hints con-
tained in this manual carefully.
To choose fish, plants, and the arrangement suitable for your aquar-
ium, follow the suggestions of an expert retailer.
To enhance as much as possible the unique style of your Askoll
PURE Aquarium, Askoll recommends using the aquarium stands
LED
specifically created for this product line.
N.B.: For ease of reference, this manual shows the PURE L
aquarium.
1. IMPORTANT SAFETY INFORMATION
The product has been designed and manufactured in conformity
with the current and applicable directives to ensure safe use and
operation throughout its life cycle. Using the product incorrectly (not
in conformity with the instructions given in this manual) can damage
the product and poses a safety risk for the user.
WARNING
Before using the product kindly read and understand
this instruction manual in all its parts.
This manual is an integral part of the product: keep it
for future reference.
This appliance can be used by children
aged from 8 years and above and per-
sons with reduced physical, sensory or
mental capabilities or lack of experience
and knowledge if they have been given
supervision or instruction concerning
use of the appliance in a safe way and
understand the hazards involved. Chil-
dren shall not play with the appliance.
Cleaning and user maintenance shall
not be made by children without super-
vision.
All manuals and user guides at all-guides.com
Aquarium you will not only enjoy
LED
LED
EN
Each power cable of the electric devices has to show a
drip loop positioned lower than the plug-outlet connec-
tion point in order to prevent any drop from reaching
such point.
The electric devices plug and outlet should not get wet.
Should the plug or outlet of any of the electric devices
become wet, do not disconnect the cable. Disconnect
power supply to the electric system acting on the main
switch.
Disconnect the plugs of the electric devices from the
outlets before handling the product and/or immersing
the hands in water.
Never pull the cable of the electric devices to discon-
nect the plugs from the outlets. To disconnect them,
grab the plugs and pull them.
model
The product has glass components.
Handle with care and place it according to the instruc-
tions of this manual avoiding to lean the tank directly
on the edges.
To avoid instability risk: check with a level that the sup-
port surface of the product is horizontal.
Do not lean the product on inclined surfaces.
After installation, do not move the product.
If necessary, move it only if the tank is completely
empty.
Do not connect the electric devices of the product to
the mains before having completed the installation or
having repositioned the same after maintenance op-
erations. Do not use the thermal heater and the pump
dry.
After disconnecting the plug, let the hot parts of the
thermal heater (about 30 minutes) and of the lighting
unit (about 5 minutes) cool down, before handling
them. On the thermal heater, the warning light indi-
cates only that the heating phase is active. When the
warning light is off, it does not mean that the thermal
heater is cool.
Check that the water level is always included in the
min. and max. level range indicated on the label.
After maintenance operations, if necessary, restore
the proper water level.
WARNING
To avoid electric risk:
To avoid the risk of burns:
3