Diono Everett NXT Manuel D'instructions page 18

INSTALLATION
3. Attach both UAS connectors to
the vehicle anchors. The UAS lock
button will change from
GREEN
"click" locking to the vehicle anchors.
WARNING!
both connectors. If the indicator is RED, use the UAS
button to release the connector from the anchor and
re-attach until the lock button turns GREEN.
4. Booster seat should rest firmly on
vehicle seat bottom and touching
the vehicle seat back. A gap is
acceptable as long as the head
support is touching the vehicle
seat back or headrest. The entire
seat bottom should sit flat on the
vehicle seat.
18
when the connectors
Ensure the UAS lock button is
Everett® NXT
RED to
3
GREEN on
4