Final Check; Model And Serial Number Location - LG LCE3010SB Manuel Du Propriétaire

Masquer les pouces Voir aussi pour LCE3010SB:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

COOKTOP INSTALLATION
3
Install the retainer brackets to the bottom of
the cooktop; then snug the bolts against the
bottom of the countertop as shown.
LCE3010SB / LCE3610SB Radiant Cooktop
Preferred installation
Retainer brackets
LCE3010SB Radiant Cooktop
Alternative installation
Rear
Front

FINAL CHECK

Perform a final operational check of the cooktop,
making sure the cooktop powers on properly and
that each Cooking Zone operates correctly. Refer
to the Operating Instructions in this guide for
details.
MODEL AND SERIAL NUMBER
LOCATION
The model and serial numbers are located on a
plate on the bottom of the cooktop. Please record
them in this guide; you will need them for
warranty registration.
I N S TA L L AT I O N I N S T RU C T I O N S
(cont.)
NOTE: The retainer brackets MUST be
installed to meet local codes or, in their
absence, with the National Electrical Code
ANSI/NFPA No. 70, latest edition.
LCE3610SB Radiant Cooktop
Alternative installation
Retainer brackets
Do not touch cooktop glass or Cooking
Zones. They may be hot enough to cause
burns.
Countertop
Cooktop
Retainer brackets
Rear
Retainer brackets
CAUTION
Bolt
Front
27

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Lce3610sb

Table des Matières