Operating Instructions; Before Using The Cooktop; Setting The Controls - LG LCE3010SB Manuel Du Propriétaire

O P E R AT I N G I N S T RU C T I O N S

BEFORE USING THE COOKTOP

Before using the cooktop for the first time, clean
it thoroughly with the included cleaner or ceramic
cooktop cleaner according to the Care and
Cleaning instructions in this guide. This will help
protect the ceramic surface and make future
cleanup easier.

SETTING THE CONTROLS

To operate the touch control pads, touch the pad
firmly with the flat part of your fingertip.
FIRST OPERATION
The first time that power is supplied to the
cooktop, the display for the controls lights for 1
seconds.
If you don't turn on the cooktop within 1 hour
after power is supplied to the cooktop, the
display for the controls blinks.
ACTIVATING THE COOKTOP
NOTE: After turning on the cooktop with the
POWER ON/OFF pad, you must select one of
the Cooking Zones within 15 seconds using the
Cooking Zone ON pad(s). If no selection is
made, the cooktop will turn off for safety.
12
To turn ON the cooktop, touch the
POWER ON/OFF pad for
approximately 2 seconds.
The indicator above the pad will
light.
To turn OFF the cooktop, touch the
POWER ON/OFF pad. The indicator
light above the pad will turn off.
CAUTION
Never use scrub pads, abrasive or etching
cleaners. They can cause permanent
damage to the cooktop surface.
SELECTING THE COOKING ZONE
To select the desired Cooking Zone,
touch the ON pad.
The display for the selected Cooking
Zone will light.
The power level indicator lights are
blinking but no power level is set
NOTE: Once the Cooking Zone has been
selected with the ON pad, the power level must
be selected within 10 seconds with the Element
power settings. Otherwise, the Cooking Zone will
turn off for safety.