Final Check - LG HN7413AG Mode D'emploi

I N S TA L L AT I O N I N S T RU C T I O N S
COOKTOP INSTALLATION
3
Install the retainer brackets to the bottom of
the cooktop; then snug the bolts against the
bottom of the countertop as shown.
Preferred
installation
Retainer
brackets

FINAL CHECK

Perform a final operational check of the cooktop,
making sure the cooktop powers on properly and
that each Cooking Zone operates correctly. Refer
to the Operating Instructions in this guide for
details.
MODEL AND SERIAL NUMBER LOCATION
The model and serial numbers are located on a
plate on the bottom of the cooktop. Please
record them in this guide; you will need them
for warranty registration.
26
(cont.)
NOTE: The retainer brackets MUST be
installed to meet local codes or, in their
absence, with the National Electrical Code
ANSI/NFPA No. 70, latest edition.
Alternative
installation
Cooktop Countertop
Bolt
Retainer
brackets
CAUTION
Do not touch cooktop glass or Cooking
Zones. They may be hot enough to
cause burns.
Retainer
brackets