Using The Bridge Cooking Zones; Using The Timer - LG HN7413AG Mode D'emploi

USING THE BRIDGE COOKING ZONES

BRIDGE COOKING ZONES
The two left Cooking Zones can be used
together as a single Cooking Zone using the
Bridge function. This allows you to cook with
larger, oblong pans.
NOTE: When using the supplied bridge pan, it
is important to rub it with oil to prevent burning
and sticking.
ACTIVATING THE BRIDGE
COOKING ZONE
Touch the BRIDGE pad. The indicator
above the pad will light.
Touch the or pad for either left
Cooking Zone to adjust the power level for
both Cooking Zones.
NOTE:
• Use the supplied bridge pan ONLY on the
bridge cooking zone.
• To purchase a replacement or additional bridge pan, call 1-800-243-0000 (U.S.A)
or 1-800-542-2623 (Canada) and choose the appropriate prompt from the menu.
Or, visit our Web site at us.lgservice.com (U.S.A) or ca.lgservice.com (Canada).

USING THE TIMER

The timer feature may be helpful if a recipe calls
for cooking for a set time. The timer can be set
from 1 to 99 minutes. Once set, the digital display
between the timer or
count down the remaining time in minutes.
SETTING THE TIMER
1
Touch the or
TIMER. Each touch will increase or decrease
the time by one minute, from 1 to 99
minutes. You may also touch and hold
or to scroll up or down. The timer
display will flash.
2 Once the desired time is set, the display will
stop flashing and the timer will start counting
down after no pad has been touched for 5
seconds. Once the timer reaches
beep will sound to indicate the time is up.
O P E R AT I N G I N S T RU C T I O N S
pads will begin to
pads under the word
, a long
NOTE: The timer function is a minute timer only.
It does NOT turn the cooktop ON or OFF.
CANCELING THE TIMER
1
To cancel the timer, touch the TIMER
and pads at the same time, OR
Touch and hold the
appears in the display.
2
The timer display will turn off.
or pad until
17