Télécharger Imprimer la page

Kenwood KNA-DV2100 Mode D'emploi page 49

Masquer les pouces Voir aussi pour KNA-DV2100:

Publicité

Les langues disponibles

Les langues disponibles

Troubleshooting
Confirm whether any problem is due to a minor operational error or a malfunction.
Check the table below before contacting your local dealer for any repair service.
General problems on the navigation system
Problem
The power does not
come on.
The map does not scroll
even when the vehicle is
moving.
The vehicle marker does
not appear.
The GPS marker is not
displayed.
There is no voice
guidance.
Small spots or bright
flashes appear in the
screen displayed.
The map disc cannot be
ejected.
Possible cause
The fuse might be
blown.
The screen shown might
not be the Current
Position screen.
The screen shown might
not be the Current
Position screen.
The GPS antenna or
your vehicle might be in
a position where GPS
signals cannot be
received.
Route guidance might
be suspended.
The guidance volume
might be turned down
low.
This is probably due to
the nature of the LCD
display.
The disc might be
incompatible or might
have been inserted
incorrectly.
Probable solution
Check the fuse. Replace it if it is
blown.
See page 13 of this manual to
display the Current Position
screen.
See page 13 of this manual to
display the Current Position
screen.
Try moving the GPS antenna or
your vehicle to a position
where there are no obstacles
around.
The route guidance is off, see
Route Options (page 25).
See User Settings (page 41).
There is nothing wrong with
the display and no need for
concern.
Restart the engine and see
page 4 of this manual.
47

Publicité

loading