Intended Use; Product Features; Technical Data; Noise/Vibration Information - Bosch GBH 18V-26 D Professional Notice Originale

Please observe the illustrations at the beginning of this oper-
ating manual.

Intended Use

The power tool is intended for hammer drilling in concrete,
brick and stone, as well as for light chiselling work. It is also
suitable for drilling without impact in wood, metal, ceramic
and plastic. Power tools with electronic control and right/left
rotation are also suitable for screwdriving.

Product Features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) SDS-plus drill chuck
(2) SDS-plus tool holder
(3) Dust protection cap
(4) Locking sleeve
(5) Rotational direction switch
(6) Handle (insulated gripping surface)
(7) On/off switch
A)
(8) Battery
(9) Battery release button
(10) Worklight
(11) Release button for impact/mode selector
switch
(12) Impact/mode selector switch
(13) Button for depth stop adjustment
(14) Auxiliary handle (insulated gripping surface)
(15) Depth stop
(16) Button for battery charge indicator
(17) Battery charge indicator
(18) Securing screw for keyed chuck
A)
(19) Keyed chuck
(20) SDS-plus shank for drill chuck
Chuck key
(21)
(22) Universal holder with SDS-plus shank
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.

Technical Data

Rotary Hammer
Article number
Rated voltage
Rated power input
Impact rate
Impact energy per stroke
according to EPTA-Proced-
ure 05:2016
Rated speed
Bosch Power Tools
A)
A)
A)
A)
A)
A)
GBH 18V-26 D
3 611 J16 0..
V = 18
W 425
rpm 0–4350
J 2.5
Rotary Hammer
– Right rotation
– Left rotation
Tool holder
Spindle collar diameter
Max. drilling diameter
– Concrete
– Masonry (with core cut-
ter)
– Steel
– Wood
Weight according to EPTA-
Procedure 01:2014
Permitted ambient temper-
ature
– during charging
A)
– during operation and
during storage
Recommended batteries
Recommended chargers
A) Limited performance at temperatures <0 °C
Technical data determined using the battery that comes with the
product.

Noise/Vibration Information

Noise emission values determined according to EN
60745-2-6.
Typically the A-weighted noise level of the power tool is:
Sound pressure level 91.1 dB(A); sound power level 102.1
dB(A). Uncertainty K = 3 dB.
Wear hearing protection
Total vibration values a (triax vector sum) and uncertainty K
h
determined according to EN 60745-2-6:
Hammer drilling into concrete: a
2
Chiselling: a = 10.0 m/s , K = 1.5 m/s
h
The vibration level given in these instructions has been
measured in accordance with a standardised measuring pro-
cedure and may be used to compare power tools. It can also
be used for a preliminary estimation of exposure to vibra-
tion.
The stated vibration level applies to the main applications of
the power tool. However, if the power tool is used for differ-
ent applications, with different application tools or poorly
maintained, the vibration level may differ. This can signific-
antly increase the exposure to vibration over the total work-
ing period.
To estimate the exposure to vibration accurately, the times
when the tool is switched off or when it is running but not ac-
tually being used should also be taken into account. This can
significantly reduce the exposure to vibration over the total
working period.
English | 15
GBH 18V-26 D
rpm 0–890
rpm 0–890
SDS-plus
mm 50
mm 26
mm 68
mm 13
mm 30
kg 3.2−3.6
°C 0 to +45
°C -20 to +50
GBA 18V...
AL 18..
GAL 18..
GAL 3680..
2 2
= 15.5 m/s , K = 1.5 m/s
h
2
,
1 609 92A 4F0 | (05.11.2018)
,